Everything Starts with Correct Measurement
In steel door production, millimetric precision is essential (mandatory) for the door's security, aesthetics, and long-lasting use. Just taking the width and height measurements of a door correctly is not enough alone. Details such as wall thickness, jamb allowances, and floor level must also be calculated correctly. Otherwise, problems such as rubbing, gaps, or curvature occur when the door is installed. This leads to difficult situations in terms of both aesthetics and use.
Precise Measurement with Laser Meter
We use laser meter technology to make our measurements with the highest accuracy. With the laser meter, both width and height are measured millimetrically; the slope of the wall, floor level, and jamb allowances are also taken into consideration. Thanks to this method, the door fits perfectly as soon as it is installed and works smoothly for years. Laser measurement is a critical technology for the door to adapt to the space, especially in high-ceilinged or wide entrances.
Floor Level and Rubbing Problem
Floor level, that is, the height of floor coverings such as parquet, marble, or ceramic, must be taken into account for the clearance under the door. If the floor level is not calculated correctly, the door rubs while closing and excessive load occurs on the hinges. This situation damages the mechanism of the door, ruining hinge and lock systems over time. Also, incorrect calculation of the gap under the door can lead to energy loss because air leakage between the door and the floor increases. That is why correct measurement is a critical start for the door in terms of both security and energy saving.
Jamb and Wall Thickness Calculation
Jamb allowances and wall thickness are important for the aesthetic appearance and mechanical durability of the door. If the jamb allowance is not sufficient, the edge of the door collides with the wall; if it is too much, the door looks like it has gaps and a security vulnerability occurs. Wall thickness also requires leaving the correct margin in hinge installation. These calculations are essential especially in armored and heavy doors to ensure the door works properly without sagging.
Security and Comfort Coming with Measurement
Thanks to measurements taken with millimetric accuracy, the door both shows full performance as soon as it is installed and works without maintenance for years. The door sash closes properly, hinges are not crushed under load, the lock mechanism works without problems. This is an essential situation for both user safety and comfort. Installation with correct measurement prevents accidents and possible deformations, especially in families with children and high-traffic entrances.
In summary, taking measurements in a steel door is just a beginning; correct measurement is the foundation of security, aesthetics, and energy efficiency. Precise measurements made with a laser meter, considering floor level, jamb allowance, and wall thickness, ensure your door works long-lastingly and smoothly. Starting your door with the correct measurement is the most critical step of safe and aesthetic use that will last for years.
